Epoxy Resin and Hardener Kit Crystal Clear | Easy Cast Resin | 32 oz
Epoxy Resin and Hardener Kit Crystal Clear | Easy Cast Resin | 32 oz
Epoxy Resin and Hardener Kit Crystal Clear | Easy Cast Resin | 32 oz
Epoxy Resin and Hardener Kit Crystal Clear | Easy Cast Resin | 32 oz
Epoxy Resin and Hardener Kit Crystal Clear | Easy Cast Resin | 32 oz
Epoxy Resin and Hardener Kit Crystal Clear | Easy Cast Resin | 32 oz
Epoxy Resin and Hardener Kit Crystal Clear | Easy Cast Resin | 32 oz
Epoxy Resin and Hardener Kit Crystal Clear | Easy Cast Resin | 32 oz
Epoxy Resin and Hardener Kit Crystal Clear | Easy Cast Resin | 32 oz
Epoxy Resin and Hardener Kit Crystal Clear | Easy Cast Resin | 32 oz
Epoxy Resin and Hardener Kit Crystal Clear | Easy Cast Resin | 32 oz
Epoxy Resin and Hardener Kit Crystal Clear | Easy Cast Resin | 32 oz

Epoxy Resin and Hardener Kit Crystal Clear | Easy Cast Resin | 32 oz

1:1 Ratio By Volume & EASY TO USE. Teexpert art epoxy resin AB adhesive kit is perfect for artwork art craft cast resin, also for coating epoxy. Very easycast resin epoxy with instructions is perfect for starter beginner and professional artist adult.

CRYSTAL CLEAR & SELF LEVEL. The easy clear cast craft resin epoxy pour kit is crystal clear casting and coating system. To ensure better self level effect, please complete the stirring in 3-4 minutes, and pour into the molds as soon as possible.

HARD AS A ROCK & NO BUBBLE. The leisure art craft DIY resin epoxy kit is fast curing and hard as a rock if you ensure 1:1 ratio by volume, and stir thoroughly. No bubble if stir evenly and slowly.

WIDE USE & NON TOXIC. The art craft crystal clear epoxy resin and hardener kit is for Jewelry Wood metal steel artwork drawing canvas paintings woodworking sculpture flowers animals earrings necklace ring keychain hair sticks eggs or other creative projects. A little smell when stirring, non toxic, but suggest PPE when handling.

HOW TO AVOID STICKY OR SOFT RESIN

1.The biggest culprit is usually off-ratio measuring,It’s important to measure the resin and hardener 1:1 ratio.

2.Stirring around and around, purposefully, as well as from side to side. Scrape the walls and the bottom of the cup a couple of times during mixing to release unmixed resin too. Then stir that through as well!

3.Epoxy Resin hates moisture, so working in very humid conditions or adding things to the epoxy resin that contain moisture will stop the resin from curing properly.

4.When you’re colouring epoxy resin with dyes and pigments, add no more than 10% of the total resin volume. The less you add, the better.

5.It’s best to stick with dyes and pigments that are designed specifically for resin,But some of pigment or dye that aren’t designed for resin will prevent the resin from curing properly.

5 SIMPLE WAYS TO ACHIEVE BUBBLE FREE

1.Stir slowly in one direction to avoid bubbles, which are very easy to produce if you stir too fast.

2.Put the mixed resin and hardener into hot water at about 60 degrees to accelerate the bubbles coming out.

3.Use the heating coaster (around 60 degrees) to accelerate the bubbles out, which is very convenient to operate.

4.Use lighter or heat gun to heat the resin surface to eliminate air bubbles.

5.If you're using silicone molds you can warm the mold in the oven before pouring the resin in it. Take the mold out of the oven, let it air for a few seconds and then pour the resin in. The warmth of the mold will get rid of the bubbles in the resin.
Only 5 in stock

Recently viewed

You may also like